Foam Tape Sales - S G30 Foam Tape is a closed cell, electron beam crosslinked, polyolefin foam with adhesive backing.

- Thermobreak
- Adhesive
- Pipe Insulation

S G30 Foam Tape is a closed cell, electron beam crosslinked, polyolefin foam with adhesive backing. It incorporates Softion foam with a solvent based acrylic tape with a PET carrier.

Softion has an outer skin on both faces, and exhibits consistent thickness and density.
The acrylic-based adhesive provides good holding power with no long-term deterioration.
It features a medium weight release liner with easy-peel properties for ease of application.
The foam is free of heavy metals, plasticisers and CFC's.

Property	Test Method	Units	Typical Value
Tensile Strength
MD	JIS K6767	kg/cm2	4.4
CD		kg/cm2	2.6
Compression Strength
25%	Internal	kg/cm2	0.35
50%		kg/cm2	1.00
Compression Set
25% Defl.n	JIS k6767	% set	6.5
50%		% set	23.0
Water Absorption	JIS K6767	mg/cm2	0.07
Water Vapour Permeability	JIS Z0208	g/m2, 24h	<4.6
Adhesion to Steel	(PSTC 3)	Kg/25mm	1.2
Sheer Strength	(PSTC 7) 1 Kg on 25x25mm	Hrs	Over 24
Tack	(J.Dow No)		20
Application Temp	Service Temperature	°C	-20 to +80
	Intermittent		100

It is essential, as with all pressure sensitive tapes, that the surface, to which the tape is applied, be clean and free of grease and oil. Suitable cleaning solvents are acetone and methylated spirits.

G60 is a high performance tissue adhesive tape. It provides excellent permanent adhesion and high initial tack. It features a heavy release liner with easy-peel properties for ease of application.

The acrylic based adhesive provides strong holding power with no long term deterioration. It offers excellent water and solvent resistance.

Adhesive system: Solvent based acrylic
Thickness: 0.10mm/
Backing: Tissue paper 13g/m2
Relase Liner: Easy - peel, white bleached Kraft paper.

Technical data
Adhesion to steel	1.4kg / 25mm
Tensile strength	3.5 kg / 25mm
Shear strength	4.8 Kg / cm2
Operating Temp. range	Service - 20°C - 85°C Short term 100°C
Tack	16 (J.Dow No)

It is essential, as with all pressure sensitive tapes, that the surface to which the tape is applied, be clean and free of grease and oil. Suitable cleaning solvents are acetone and methylated spirits.